Tag: windows xp

This is an unique technique for XP, which could improve the performance significantly by tweaking the prefetcher. Recommended hardware: PIII 800 or higher, 512M RAM or more. Lanjutkan membaca Increase speed by tweaking prefetcher settings

If your system hangs about 2 or 3 minutes at startup, where you can’t access the Start button or the Taskbar, it may be due to one specific service (Background Intelligent Transfer) running in the background. Microsoft put out a patch for this but it didn’t work for me. Here’s what you do: Lanjutkan membaca Correcting System Hang at Startup

1. Right click My Computer
2. Select Properties
3. Click Advanced
4. Choose Performance
5. Click Advanced again
6. Select either Programs or System Cache under Memory Usage.

Lanjutkan membaca Easy Way to Adjust LargeSystemCache

For Users with 256 MB RAM or more this tweak will boost their Windows- and Game-Performance.
What it does: It tells Windows not to use any Swap File until there is really no more free RAM left.

Open the System Configuration Utility by typing msconfig.exe in the RUN command. There in your System.ini you have to add “ConservativeSwapfileUsage=1” under the Lanjutkan membaca Swap File Tweak

1. Open notepad.exe, type “del c:\windows\prefetch\ntosboot-*.* /q” (without the quotes) & save as “ntosboot.bat” in c:\
2. From the Start menu, select “Run…” & type “gpedit.msc”.
3. Double click “Windows Settings” under “Computer Configuration” and double click again on “Shutdown” in the right window.
4. In the new window, click “add”, “Browse”, locate your “ntosboot.bat” file & click “Open”.
5. Click “OK”, “Apply” & “OK” once again to exit.
6. From the Start menu, select “Run…” & type “devmgmt.msc”.
7. Double click on “IDE ATA/ATAPI controllers”
8. Right click on “Primary IDE Channel” and select “Properties”.
9. Select the “Advanced Settings” tab then on the device 0 or 1 that doesn’t have ‘device type’ greyed out select ‘none’ instead of ‘autodetect’ & click “OK”.
10. Right click on “Secondary IDE channel”, select “Properties” and repeat step 9.
11. Reboot your computer.

If you have a 3min+ or slower boot time where Windows XP seems to sit for 2+ or so minutes with the XP logo doing nothing before everything comes to life, then do the following.

Download Bootvis from Microsoft and run it the next time you boot. Do a ‘Trace’
If it shows a very long ‘HDD init’ time of minutes rather than seconds then this is how to fix it. Lanjutkan membaca HDD slowdown when booting

To change from FAT 32 to NTFS for more stability and security, open the command prompt and type: “Convert C: /FS:NTFS”. Make sure there is a space between the C: and the foward slash (/). Once you press enter it will ask you for confirmation and press Lanjutkan membaca Convert FAT32 To NTFS

If XP will not install from the CD or if you have a new drive with no operating system on it yet try these:

Install Windows XP from the hard drive with Windows 98 already installed:

Boot Windows 98
Insert the XP CD into your CD reader
Explore Windows XP through My Computer
Copy i386 folder to C:\
Go into C:\i386 folder and double click Lanjutkan membaca Install XP from DOS

It is possible to disable XP splash screen, which will slightly speed up the overall boot process. Be aware that removing the splash screen will also cause you not to see any boot-up messages that might come up (chkdsk, convert … ), but if your system runs without any problems then it should not matter. Lanjutkan membaca Disable XP Boot Logo